Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 79)

5–34 Configuring Your Reader
Publication 2755-6.9
•
Code 39. You can use any number between 1 and 64 for the
Fixed Code Length. The default is 10.
Command Parameter Format Example
Status
0 = Disabled
1 = Enabled
Check Digit Status
0 = Disabled
1 = Enabled
Check Digit Output Status
<Kpstatus,check digit
status,check digit output
To set Fixed Code Length to 30, press
0 = Disabled Kp
status,check digit output
status,large intercharacter To set Fixed Code Length to 30, press
[<Kp,,,,1,30>] or
1 = Enabled
Kp status,large intercharacter
gap,fixed code length [<Kp,,,,1,30>] or
[<Kp1,0,0,0,1,30>] .
Large Intercharacter Gap
status,code length>
p
0 = Disabled
1 = Enabled
Fixed Code Length Status
0 = Disabled
1 = Enabled
•
Codabar. You can use any number between 1 and 31 for the
Fixed Code Length. The default is 10.
Command Parameter Format Example
Status
0 = Disabled
1 = Enabled
Start and Stop Match Status
0 = Disabled
1 = Enabled
Start and Stop Output Status
0 = Disabled
1 = Enabled
Large Intercharacter Gap
<Kqstatus,start & stop
0 = Disabled
match status,start & stop
output status,large
To set Fixed Code Length to 9, press
1 = Enabled Kq
output status,large
intercharacter gap,fixed To set Fixed Code Length to 9, press
[<Kq1,,,,1,9>] or
Fixed Code Length Status
Kq intercharacter gap,fixed
code length status,code [<Kq1,,,,1,9>] or
[<Kq1,1,1,0,1,9>] .
0 = Disabled
length,check digit
q
1 = Enabled
type,check digit output>
Check Digit Output
0 = Disabled
1 = Enabled
Check Digit Type
0 = Disabled
1 = Mod 16
2 = NW7
3 = Both