Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 44)

4–14 Installing Your Hardware
Publication 2755-6.9
6. Disconnect the slave interface box from the master interface box.
7. Connect the configuration terminal to the slave interface box.
8. Turn on the slave interface box.
9. Configure the slave reader. Refer to chapter 5 for the reader
configuration sequence information.
10. Turn off power to the slave reader.
11. Unplug the configuration terminal from the slave interface box.
12. Connect the slave interface box to the master interface box.
13. Turn on the slave interface box.