Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 74)

5–29 Configuring Your Reader
Publication 2755-6.9
•
Postamble. You can enter one or two postamble characters except
a null (00H).
Command Parameter Format Example
Status
0 = Disabled Ke
<Kestatus,postamble To disable Postamble, press
[<Ke0>]
1 = Enabled
Ke
character(s)> [<Ke0>] .
•
LRC
Command Parameter Format Example
Status
0 = Disabled Kc <Kcstatus> To enable LRC, press [<Kc1>] .
1 = Enabled
Kc <Kcstatus> To enable LRC, press [<Kc1>] .
•
Response Timeout. You can use any number from zero to 65,000.
(A zero causes an indefinite wait.) The default is 12 ms.
Parameter Format Example
KA <KAtimeout setting>
To change Response Timeout to 30 ms,
press
[<KA30>] .
•
Intercharacter Delay. You can use any number from zero to 255.
The default is zero.
Parameter Format Example
KB <KAtime interval>
To change Intercharacter Delay to
30 ms, press
[<KB30>] .