Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 47)

5–2 Configuring Your Reader
Publication 2755-6.9
4. Press [<D>] to access the Main menu. The Main menu appears:
The bottom line on the screen is called the command line. The
command line identifies your place in the menu program, shows
current status, and allows you to review and change options. Use the
designated keys to scroll to and select the parameter you wish to
change. Press space bar key (SP) or
[N] to scroll ahead, [B] to scroll
back, carriage return key (CR) to select, and [M] to return to the
previous higher level menu. To return to the Main menu at any time,
press
[ESC] and [M] .
Saving Menu Changes
To save menu changes:
1. Press [ESC] to see the following on the command line.