Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 129)

Application Examples E–13
Publication 2755-6.9
PLC-5 Controllers Setup
You need to configure the Channel 0 port of the PLC-5 controllers.
Follow the steps below or refer to the following publications:
•
Classic PLC-5 Family Programmable Controllers Hardware
Installation Manual (Publication No. 1785-6.6.1)
•
PLC-5 Programming Software Instruction Set Reference Manual
(Publication No. 6200-6.4.11)
•
PLC-5 Programming Software Configuration and Maintenance
Manual (Publication No. 6200-6.4.6)
1. Set the PLC-5 Channel 0 to User in the Channel 0 Configuration
screen.
2. Configure Channel 0 in the User Mode Channel 0 Configuration
screen.