Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 120)

Application Examples E–4
Publication 2755-6.9
Hardware Connections for the Flexible Interface Module
The interface box connects to one of the three communication ports
on the flexible interface module with an RS-232 cable. The interface
module requires an SFC1 Protocol Cartridge.
Interface Box
To RS-232 Port
Personal
Computer
Power Supply
To Power Receptacle
RS-232 Cable
RS-232 Null Modem Cable
(Swap pins 2 and 3.)
Reader
OR
SFC1 Protocol Cartridge
Flexible Interface Module
Configuration Codes for the Flexible Interface Module
After making the necessary connections, set the reader to the settings
in the table below to allow the reader to communicate with the
flexible interface module.
Description Menu Setting Serial Command Setting
Baud Rate 9600
Parity None
Stop Bits One
<Ka4,0,0,1>
Data Bits 8