Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 39)

4–9 Installing Your Hardware
Publication 2755-6.9
To wire the Switchcraft connector, refer to the following table.
Contact your local Allen-Bradley sales office or distributor for
more information regarding PHOTOSWITCH photoelectric
sensors.
Switchcraft Connector Pin Function of Connection PHOTOSWITCH Wire Color
One Trigger from switch Black (Output)
Four +12V dc from interface box Brown
Five Ground Blue
3. Construct a cable that has three 25-pin connectors and will allow
you to connect the host device or configuration terminal, interface
box, and auxiliary port together. Refer to appendix B and
page 6–11 for information regarding cable pinouts.
4. Connect the interface box to host device or configuration terminal
and auxiliary port.
Interface Box
To RS-232 Port
To Host Device
To Auxiliary
Monitor