Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 42)

4–12 Installing Your Hardware
Publication 2755-6.9
To wire the Switchcraft connector, refer to the following table.
Contact your local Allen-Bradley sales office or distributor for
more information regarding PHOTOSWITCH photoelectric
sensors.
Switchcraft Connector Pin Function of Connection PHOTOSWITCH Wire Color
One Trigger from switch Black (Output)
Four +12V dc from interface box Brown
Five Ground Blue
3. Construct a cable that has 25-pin connectors and will allow you to
connect the host device or configuration terminal and interface
boxes together. Refer to appendix B and page 6–9 for
information regarding cable pinouts.
4. Connect the master interface box to the host device or
configuration terminal and slave interface box. (The master
interface box is connected to the master reader and the slave
interface box is connected to the slave reader.)
Master Interface Box
To RS-232 Port
To Host Device
To RS-232 Port
Slave Interface Box