Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 86)

Chapter
6
Publication 2755-6.9
Hardware Operation
This chapter provides information on how to operate your scanner
system hardware. Items include:
•
using operational commands
•
operating scanner system hardware
On-line serial operational commands are sent from the host to the
reader to carry out routine operations “on the fly” as distinguished
from serial configuration commands that are generally used in initial
setup.
Operational commands are preceded by a < left angle bracket symbol
and followed by a > right angle bracket symbol. Command start
character by default is a left angle bracket, <. It may be redefined by
menu or serial command. However, the end character, a right angle
bracket, >, cannot be changed.
The table on the next page lists the operational commands.
Using Operational
Commands