Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 36)

4–6 Installing Your Hardware
Publication 2755-6.9
To wire the Switchcraft connector, refer to the following table.
Contact your local Allen-Bradley sales office or distributor for
more information regarding PHOTOSWITCH photoelectric
sensors.
Switchcraft Connector Pin Function of Connection PHOTOSWITCH Wire Color
One Trigger from switch Black (Output)
Four +12V dc from interface box Brown
Five Ground Blue
3. Plug host device or configuration terminal into the RS-232 or
RS-485/422 port on the interface box. If you are using the
RS-485/422 port, press the mode switch on the interface box to
access the correct communication protocol.
Interface Box
To RS-232 Port To RS-485/422 Port
To Host Device