Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 35)

4–5 Installing Your Hardware
Publication 2755-6.9
Follow the steps starting below to connect your system hardware
together when using an interface box. Refer to appendix B for cable
pinouts.
1. Plug the reader into the interface box.
Interface Box
To Scanner Port
Reader
2. Plug any sinking package detect or relay options to the trigger
connector port on the interface box. For example, use a
Switchcraft connector (No. 12BL6M) or equivalent to connect to
the trigger connector port. Contact Switchcraft at (312) 631–1234
for connector availability and pricing.
Interface Box
To Trigger Connector
Package Detector
Connecting System
Hardware Together When
Using an Interface Box