Dell PowerVault MD3260i - Manual (Page 135)

Parameter Description
Enclosure ID values are 0 to 99. Drawer ID values are 0
to 4. Slot ID values are 0 to 31. Enclose the enclosure ID
values, the drawer ID values, and the slot ID values in
parentheses.
Notes
The SSD cache can contain any number of SSDs. The maximum size of the SSD cache is 5 TB, but might be less
depending on the size of the RAID controller module’s primary cache.
Add Virtual Disk To Remote Replication Group
Description
This command adds a primary virtual disk to a remote replication group. This command is valid only on the local storage
array that contains the remote replication group to which you want to add the primary virtual disk. A remote replication
group has a repository volume that is used to save data for all of the point-in-time images that are part of the remote
replication group.
Syntax
add virtualDisk="virtualDiskName"
asyncRemoteReplicationGroup="asyncRemoteReplicationGroupName"
remotePassword="password"
(repositoryVirtualDisk="repos_xxxx" | repositoryVirtualDisk=(diskGroupName
[capacity=capacityValue]) repositoryVirtualDisk=(diskPoolName
[capacity=capacityValue]))
Parameters
Parameter Description
virtualDisk The name of the primary virtual disk that you want to add
to the remote replication group. Enclose the virtual disk
name in double quotation marks (" ").
asyncRemoteReplicationGroup The name of the remote replication group that will contain
the member virtual disk that you want to add. Enclose the
remote replication group name in double quotation marks
(" ").
remotePassword This parameter is optional. Use this parameter when the
remote storage array is password protected. Enclose the
password in double quotation marks (" ").
repositoryVirtualDisk The name of the repository virtual disk that will contain the
remote replication group.
You have two options for defining the name of a repository
virtual disk:
135