Dell PowerVault MD3260i - Manual (Page 194)

Deactivate Remote Replication (Legacy)
NOTE: This command valid only with Fibre Channel storage arrays.
Description
This command deactivates the Remote Replication (legacy) premium feature, disassembles the replication repository
virtual disk, and releases the RAID controller module owner of the secondary virtual disk. The RAID controller module
host port that is dedicated to the secondary virtual disk is available for host data transfers.
Syntax
deactivate storageArray feature=remoteReplication
Parameters
None.
Delete Consistency Group
Description
This command deletes a snapshot consistency group in two ways:
• You can delete both the consistency group and the repository virtual disks contained by the consistency group.
• You can delete only the consistency group and leave the repository virtual disks that are contained by the
consistency group intact.
Syntax
delete consistencyGroup [snapGroupName]
[deleteRepositoryMembers=(TRUE | FALSE)]]
Parameter
Parameter Description
snapConsistencyGroup The name of the snapshot consistency group that you
want to delete. Enclose the snapshot consistency group
name in square brackets ([ ]). If the snapshot consistency
group name has special characters, you must enclose the
snapshot consistency group name in double quotation
marks (" ").
deleteRepositoryMembers The setting to delete on or retain the repository virtual
disks. To delete the repository virtual disks, set this
parameter to TRUE. To retain the repository virtual disks,
194