Dell PowerVault MD3260i - Manual (Page 387)

• Show Consistency Group Snapshot Image
• Show Remote Replication Group
• Show Remote Replication Group Synchronization Progress
• Show Snapshot Group
• Show Snapshot Image
• Show Snapshot Virtual Disks
• Show SSD Cache
• Show SSD Cache Statistics
• Show Storage Array Core Dump
• Show Storage Array DBM Database
• Show Storage Array Host Topology
• Show Thin Virtual Disk
• Start Consistency Group Snapshot Rollback
• Start Remote Replication Synchronization
• Start Snapshot Image Rollback
• Start SSD Cache Performance Modeling
• Start Storage Array Configuration Database Diagnostic
• Stop Consistency Group Snapshot Rollback
• Stop Consistency Group Snapshot Virtual Disk
• Stop Pending Snapshot Images On Consistency Group
• Stop Snapshot (Legacy) Rollback
• Stop Snapshot Group Image
• Stop Snapshot Group Pending Snapshot Images
• Stop Snapshot Image Rollback
• Stop Snapshot Virtual Disk
• Stop SSD Cache Performance Modeling
• Stop Storage Array Configuration Database Diagnostic
• Suspend SSD Cache
• Suspend Remote Replication Group
• Test Remote Replication Group Connectivity
Updated Commands
The syntax of the following commands has been modified, updated, or enhanced since the last release of this document.
Note that not all commands are necessarily valid with all storage arrays. Some commands are specific to certain
platforms.
• Activate Remote Replication Feature
• Create Disk Pool
• Create RAID Virtual Disk on a Disk Pool
• Create Snapshot (Legacy) Virtual Disk
• Create Virtual Disk Copy
• Delete Snapshot (Legacy) Virtual Disk
• Delete Virtual Disk On A Disk Pool
• Resume Snapshot (Legacy) Rollback
387