Start disk group blink, Parameters, Description – Dell PowerVault MD3260i User Manual

Page 348: Syntax

Advertising
background image

Parameters

Parameter

Description

consistencyGroupName

The name of the consistency group for which you want to
start a rollback operation. Enclose the name of the
consistency group in double quotation marks (" ") inside
square brackets ([ ]). When the
memberVirtualDiskSet parameter is not used, the
rollback process applies to all member virtual disks of the
consistency group.

memberVirtualDiskSet

The name of one or more member base virtual disks in a
consistency group that you want to rollback. Enclose each
member base virtual disk name in double quotation marks
(" ") inside parenthesizes (( )).
You can enter more than one member virtual disk name.

Enclose all of the member virtual disk names in one set of

double quotation marks (" ") inside parenthesizes (( )).

Separate each member virtual disk name with a white

space.

Notes

To start a roll back operation for an entire consistency group that has the name congroup1, you would use this
command:
start cgSnapImage ["congroup1"] rollback;

To start a roll back operation for base virtual disk members memVol1, memVol2, and memVol3 in a consistency group
that has the name congroup2, you would use this command:
start cgSnapImage ["CG2:12345"] rollback memberVirtualDiskset=("memVol1 memVol2

memVol3");

Start Disk Group Blink

Description

This command identifies the physical disks that are logically grouped together to form the specified disk group by
blinking the indicator LEDs on the physical disks. (Use the stop diskGroup blink command to turn off the
indicator LEDs on the physical disks.)

Syntax

start diskGroup [diskGroupNumber] blink

348

Advertising