Dell PowerVault MD3260i - Manual (Page 344)

Show Virtual Disk Copy
Description
This command returns information about virtual disk copy operations. The following information is returned:
• Copy status
• Start timestamp
• Completion timestamp
• Copy priority
• Source virtual disk WWID or target virtual disk WWID
• Read-only attribute setting of the target virtual disk
You can retrieve information about a specific virtual disk copy pair or all virtual disk copy pairs in the storage array.
Syntax
show virtualDiskCopy (allVirtualDisks |
source ["sourceName"] |
target ["targetName"])
Parameters
Parameter Description
allVirtualDisks Returns information about virtual disk copy operations for
all virtual disk copy pairs.
source Name of the source virtual disk about which to retrieve
information. You must put quotation marks (" ") and
brackets ([ ]) around the source virtual disk name. The
source virtual disk name and quotation marks must be
inside the brackets.
target Name of the target virtual disk about which to retrieve
information. You must put quotation marks (" ") and
brackets ([ ]) around the target virtual disk name. The
target virtual disk name and quotation marks must be
inside the brackets.
Show Virtual Disk Copy Source Candidates
Description
This command returns information about the candidate virtual disks that you can use as the source for a virtual disk
copy operation.
Syntax
show virtualDiskCopy sourceCandidates
344