Dell PowerVault MD3260i - Manual (Page 320)

– Enclosure location and slot location
– Preferred channel
– Redundant channel
• Hot spare coverage
• Details for each physical disk
Depending on the size of the storage array, this information can be several pages long. The physical disk information is
also returned when you issue the show storageArray profile command.
Syntax
show (allPhysicalDisks
[driveMediaType=(HDD | SSD | unknown | allMedia)] |[physicalDiskType=(SAS)])
| (physicalDisk [enclosureID,slotID] | physicalDisks [enclosureID1,slotID1
enclosureID2,slotID2... enclosureIDn,slotIDn])
summary
Parameters
Parameter Description
allPhysicalDisks Returns information about all physical disks in the storage
array.
NOTE: To determine information about the type and
location of all physical disks in the storage array, use
the allPhysicalDisks parameter.
driveMediaType retrieve information. Valid physical disk media are these:
• HDD—Use this option when you have hard
physical disks
• in the expansion enclosure.
• SSD—Use this option when you have solid state
physical disks in the expansion enclosure.
• unknown—Use if you are not sure what types of
physical disk media are in the expansion
enclosure.
• allMedia – Use this option when you want to use
all types of physical disk media that are in the
expansion enclosure.
physicalDiskType The type of physical disk for which you want to retrieve
information. The valid physical disk type is SAS.
physicalDisk or physicalDisks Identifies the enclosure and slot where the physical disk
resides. You can enter enclosure IDs and slot IDs for one
or several physical disks. Enclosure ID values are 0 to 99.
Slot ID values are 0 to 31. You must put parentheses
around the enclosure ID values and the slot ID values.
summary Returns the status, capacity, data rate, product ID, and
firmware version for the specified physical disks.
320