Validate storage array security key, Parameters, Description – Dell PowerVault MD3260i User Manual

Page 378: Syntax

Advertising
background image

Parameters

Parameter

Description

asyncRemoteReplicationGroup

The name of an existing remote replication group that you
want to test. Enclose the remote replication group name in
square brackets ([ ]). If the remote replication group name
has special characters, you also must enclose the remote
replication group name in double quotation marks (" ").

testID

The identifier for the diagnostic test you want to run. The
identifier and corresponding tests are as follows:

All—Performs all the tests associated with this

command.

Connectivity—Verifies that the two RAID

controller modules have a communication path.

The connectivity test sends an inter-RAID

controller module message between the storage

arrays, and then validates that the corresponding

remote replication group on the remote storage

array exists. It also validates that the virtual disk

members of the remote replication group on the

remote system match the virtual disk members of

the remote replication group on the local system.

Latency—Sends a SCSI test unit command to

each virtual disk on the remote storage array

associated with the remote replication group to

test the minimum, average, and maximum latency.

Bandwidth—Sends two inter-RAID controller

module messages to the remote storage array to

test the minimum, average, and maximum

bandwidth as well as the negotiated link speed of

the port on the RAID controller module performing

the test.

Port connections—Shows the port that is

being used for replicating on the local storage

array and the port that is receiving the replicated

data on the remote storage array.

Validate Storage Array Security Key

Description

This command validates the security key for a storage array that has self-encrypting disk physical disks to make sure
that the security key is not corrupt.

Syntax

validate storageArray securityKey

file="fileName"

passPhrase="passPhraseString"

378

Advertising