Reset remote replication group statistics, Description, Syntax – Dell PowerVault MD3260i User Manual

Page 238: Parameters

Advertising
background image

controller module command is sent to RAID controller module 0 to request a reset of RAID controller module 1, then
RAID controller module 0 holds RAID controller module 1 in reset and then releases RAID controller module 1 from reset,
which is a hard reboot. A soft reboot in some products only resets the IOC chip. A hard reboot resets both the IOC chip
and the expander chips in the RAID controller module.

Reset Remote Replication Group Statistics

Description

This command resets the synchronization statistics for one or more member virtual disks in a remote replication group to
a relative 0.

Syntax

reset storageArray arvmStats asyncRemoteReplicationGroup

["asyncRemoteReplicationGroupName"] virtualDisk="virtualDiskName"

sampleType=(all | mostRecent | longestSyncTime | errors)

Parameters

Parameter

Description

asyncRemoteReplicationGroup

The name of the remote replication group for which you
are resetting the synchronization statistics. Enclose the
remote replication group name in square brackets ([ ]). If
the remote replication group name has special
characters, you also must enclose the remote replication
group name in double quotation marks (" ") inside square
brackets. If the remote replication group name consists
only of numbers, such as "1002," you also must enclose the
remote replication group name in double quotation marks
(" ") inside square brackets.

virtualDisk

This parameter is optional. The name of the specific
member virtual disk in the remote replication group for
which you are resetting the synchronization statistics. If
no virtual disk is specified, the statistics for every member
virtual disk in the remote replication group are reset.
Enclose the virtual disk name in double quotation marks ("

").

sampleType

This parameter is optional. The default value for
sampleType is all.

all—Data for all three sample types are reset.

mostRecent—Statistics are reset for the most

recent 50 resynchronization samples.

longestSyncTime—Statistics are reset for

the most recent 20 longest resynchronization

samples.

238

Advertising