Dell PowerVault MD3260i - Manual (Page 324)

Show Remote Replication Group
Description
This command displays configuration information for one or more remote replication groups. This command also
displays the remote replicated pairs associated with each remote replication group, including incomplete remote
replicated pairs.
You can also use this command to show the progress of periodic data synchronization on all of the replicated pairs
within the remote replication group.
Syntax
show (allAsyncRemoteReplicationGroups |
asyncRemoteReplicationGroup ["asyncRemoteReplicationGroupName"])
[summary]
Parameters
Parameter Description
allAsyncRemoteReplicationGroups Use this parameter if you want to display the properties
for all remote replication groups.
asyncRemoteReplicationGroup Use this parameter to display the properties for a remote
replication group. Enclose the remote replication group
name in square brackets ([ ]). If the remote replication
group name has special characters, you also must
enclose the remote replication group name in double
quotation marks (" ") inside square brackets. If the remote
replication group name consists only of numbers, such as
"1002," you also must enclose the remote replication group
name in double quotation marks (" ") inside square
brackets.
summary Use this optional parameter to show a concise list of
information about the synchronization progress of one or
more remote replication groups.
Show Remote Replication Group Synchronization Progress
Description
This command displays the progress of periodic synchronization of the remote replication group between the local and
remote storage array. This command returns the progress of data synchronization on all of the replicated pairs within
the remote replication group. This command shows the progress as a percentage of data synchronization that has been
completed.
324