Dell PowerVault MD3260i - Manual (Page 198)

Delete Host Group
Description
This command deletes a host group.
CAUTION: This command deletes all of the host definitions in the host group.
Syntax
delete hostGroup [hostGroupName]
Parameter
Parameter Description
hostGroup Name of the host group to delete. You must put brackets
([ ]) around the host group name. If the name of the host
group has special characters, you must also put quotation
marks (" ") around the host group name.
NOTE: A host group is an optional topological element
that is a collection of hosts that share access to the
same virtual disks. The host group is a logical entity.
Delete Host Port
Description
This command deletes an HBA host port identification. The identification is a software value that represents the physical
HBA host port to the RAID controller module. By deleting the identification, the RAID controller module no longer
recognizes instructions and data from the HBA host port.
Syntax
delete hostPort [hostPortName]
Parameter
Parameter Description
hostPort Name of the HBA host port to delete. You must put
brackets ([ ]) around the name of the HBA host port.
198