Dell PowerVault MD3260i - Manual (Page 235)

Repair Virtual Disk Consistency
Description
This command repairs the consistency errors on a virtual disk.
Syntax
repair virtualDisk [virtualDiskName] consistency
consistencyErrorFile="filename"
[verbose=(TRUE | FALSE)]
Parameters
Parameter Description
virtualDisk Name of the specific virtual disk for which to repair
consistency. You must put brackets ([ ]) around the virtual
disk name. If the virtual disk name has special characters,
you must also put quotation marks (" ") around the virtual
disk name.
consistencyErrorFile Name of the file that contains the consistency error
information you use to repair the errors. You must put
quotation marks (" ") around the file name.
verbose Captures progress details, such as percent complete, and
shows the progress detail information as virtual disk
consistency is being repaired. To capture progress
details, set this parameter to TRUE. To prevent capturing
progress details, set this parameter to FALSE.
Replace Physical Disk
Description
This command redefines the composition of a disk group by replacing a physical disk that is in the disk group with either:
• An unassigned physical disk
• A fully integrated hot spare physical disk
Syntax
replace physicalDisk ([enclosureID,slotID] | <wwID>)
replacementPhysicalDisk=enclosureID,slotID
235