Dell PowerVault MD3260i - Manual (Page 183)

enclosureLossProtect=(TRUE | FALSE)
userLabel="snapshotVirtualDiskName"
warningThresholdPercent=percentValue
repositoryPercentOfBase=percentValue
repositoryUserLabel="repositoryName"
repositoryFullPolicy=(failBaseWrites | failSnapshot)
enableSchedule=(TRUE | FALSE)
schedule=(immediate | snapshotSchedule)]
Syntax (Existing Repository Disk Group)
create snapshotVirtualDisk baseVirtualDisk="baseVirtualDiskName"
[repositoryDiskGroup="repositoryDiskGroupName"
repositoryUserLabel="repositoryName"
freeCapacityArea=freeCapacityIndexNumber
userLabel="snapshotVirtualDiskName"
warningThresholdPercent=percentValue
repositoryPercentOfBase=percentValue
repositoryFullPolicy=(failBaseWrites | failSnapshot)
enableSchedule=(TRUE | FALSE)
schedule=(immediate | snapshotSchedule)]
Parameters
Parameter Description
baseVirtualDisk The name of the base virtual disk from which you want to
take a snapshot (legacy). Enclose the base virtual disk
name in double quotation marks (" ").
repositoryRAIDLevel Use this parameter when you create a new disk group.
The RAID level for the snapshot (legacy) repository disk
group. Valid values are 1, 5, or 6.
repositoryPhysicalDisks Use this parameter when you create a new disk group.
The physical disks that you want to assign to the snapshot
(legacy) repository disk group. Specify the enclosure ID
value and the slot ID value for each physical disk that you
assign to the snapshot (legacy) repository virtual disk.
Enclosure ID values are 0 to 99. Slot ID values are 0 to
31. Enclose the enclosure ID values and the slot ID values
in parentheses.
repositoryPhysicalDiskCount Use this parameter when you create a new disk group.
The number of unassigned physical disks that you want to
use for the snapshot (legacy) repository disk group.
repositoryDiskGroupUserLabel Use this parameter when you create a new disk group.
The name of a new disk group to be used for the
repository virtual disk. Enclose the repository disk group
name in double quotation marks (“ ”).
repositoryDiskGroup The name of an existing disk group where you want to
place the repository virtual disk. Use this parameter if you
do not want to put the repository virtual disk in the same
disk group as the base virtual disk. The default is to use
the same disk group for both the base virtual disk and the
183