Dell PowerVault MD3260i - Manual (Page 291)

repositoryFullPolicy=(failSourceWrites |
failSnapshot)
enableSchedule=(TRUE | FALSE) |
schedule=(immediate | snapshotSchedule)
rollbackPriority=(0 | 1 | 2 | 3 | 4)
Parameters
Parameter Description
virtualDisk or virtualDisks The name of the specific snapshot virtual disk for which
you want to define properties. (You can enter more than
one virtual disk name if you use the virtualDisks
parameter). Enclose the snapshot virtual disk name in
double quotation marks (“ ”) inside of square brackets ([ ]).
userLabel A new name that you want to give to a snapshot virtual
disk. Enclose the new snapshot virtual disk name in
double quotation marks (“ ”).
warningThresholdPercent The percentage of repository capacity at which you
receive a warning that the snapshot repository is nearing
full. Use integer values. For example, a value of 70 means
70 percent. The default value is 50.
repositoryFullPolicy How you want snapshot processing to continue if the
snapshot repository virtual disk is full. You can choose to
fail writes to the source virtual disk
(failSourceWrites) or fail writes to the snapshot
virtual disk (failSnapshot). The default value is
failSnapshot.
enableSchedule Turns on or off the snapshot scheduling feature. To turn
on snapshot scheduling, set this parameter to TRUE. To
turn off snapshot scheduling, set this parameter to
FALSE.
schedule Use this parameter to schedule a snapshot operation, with
the following options:
• immediate
• startDate
• scheduleDay
• startTime
• scheduleInterval
• endDate
• noEndDate
• timesPerDay
• timeZone
For more information, see Scheduling Snapshots.
rollbackPriority Determines whether system resources must be allocated
to the rollback operation at the expense of system
291