Remove virtual disk copy, Syntax, Parameter – Dell PowerVault MD3260i User Manual

Page 231: Description, Parameters

Advertising
background image

Syntax

remove remoteReplication (localVirtualDisk [virtualDiskName] |

localVirtualDisks [virtualDiskName1... virtualDiskNameN])

Parameter

Parameter

Description

localVirtualDisk or localVirtualDisks

The name of the primary virtual disk (the virtual disk on the

local storage array) that you want to remove. You can

enter more than one virtual disk name. Enclose the virtual

disk name in square brackets ([ ]). If the virtual disk name

has special characters, you also must enclose the virtual

disk name in double quotation marks (" ").

Remove Virtual Disk Copy

Description

This command removes a virtual disk copy pair.

Syntax

remove virtualDiskCopy target [targetName]

[source [sourceName]]

copyType=(online | offline)

Parameters

Parameter

Description

target

Name of the target virtual disk to remove. You must put

brackets ([ ]) around the target virtual disk name. If the

target virtual disk name has special characters, you must

also put quotation marks (" ") around the target virtual disk

name.

source

Name of the source virtual disk to remove. You must put

brackets ([ ]) around the source virtual disk name. If the

source virtual disk name has special characters, you must

also put quotation marks (" ") around the source virtual

disk name.

copyType

Identifies a virtual disk copy with a snapshot. If the virtual

disk copy has an online copy snapshot, set this parameter

to online. If the virtual disk copy does not have a

snapshot, set this parameter to offline.

231

Advertising