Dell PowerVault MD3260i - Manual (Page 146)

Parameter Description
remote replication fault. Enclose the member virtual disk
name in square brackets ([ ]). If the virtual disk name has
special characters, you also must enclose the virtual disk
name in double quotation marks (" ") inside square
brackets. If the virtual disk name consists only of numbers,
such as "1002," you also must enclose the virtual disk
name in double quotation marks (" ") inside square
brackets.
virtualDisks The names of several member virtual disks (in a remote
replication group) from which you want to clear the
remote replication fault. Enter the names of the member
virtual disks using these rules:
• Enclose all of the names in square brackets ([ ]).
• Enclose each of the names in double quotation
marks (" ").
• Separate each of the names with a space.
Clear Storage Array Configuration
Description
Use this command to:
• Clear the entire storage array configuration, and return it back to the initial installation state.
• Clear the configuration except for security information and identification information.
• Clear disk group configuration information and virtual disk configuration information only.
CAUTION: As soon as you run this command, the existing storage array is deleted.
Syntax
clear storageArray configuration (all | diskGroups)
Parameters
If you do not enter a parameter, this command removes all configuration information for the storage array, except for the
information related to security and identification.
146