Save storage array dbm database, Parameter, Description – Dell PowerVault MD3260i User Manual

Page 255: Syntax, Parameters

Advertising
background image

Parameter

Parameter

Description

file

The file path and the file name to which you save the core
dump. Enclose the file name in double quotation marks ("
"). For example: file="C:\Array Backups
\DBMbackup_03302010.core"

Save Storage Array DBM Database

Description

This command saves the database management (DBM) of the storage array.

Syntax

save storageArray dbmDatabase

[sourceLocation=(disk | onboard) |

controller [(0|1)] |

contentType=(raidConfigration | all)]

file="fileName"

Parameters

Parameter

Description

sourceLocation

This parameter specifies the location from which to obtain
backup database information.

disk indicates that data comes directly from the

database on the physical disk

cache indicates that data comes from the RPA

memory location

The default location is disk.

controller

This parameter specifies the controller from which data
will be exclusively retrieved, if sourceLocation is set
to onboard. If the controller parameter is not specified,
data might be retrieved from either controller. Valid
controller identifiers are 0 or 1, where 0 is the controller
in slot 0, and 1 is the controller in slot 1.

contentType

This parameter specifies the content type of the data that
will be retrieved.

If the parameter is set to

raidConfiguration, the RAID configuration

data will be retrieved. The RAID configuration

data includes disk groups and associated virtual

disks.

255

Advertising