Dell PowerVault MD3260i - Manual (Page 48)

5. Click OK.
Configuring Alert Notifications
You can use the Configure Alerts dialog box to set up an email alert notification in the event of an error on the network.
Alert emails are sent to the specified global mail server and sender email addresses in the event of an error on the
selected hosts of storage arrays. You can choose to be alerted to all problems or individual problems.
1. Open the Configure Alerts dialog box by performing one of these actions:
a) Select a storage array in the Devices tab, and then select Edit → Configure Alerts.
The Configure Alerts dialog box appears. Go to step 4.
b) On the Setup tab, select Edit → Configure Alerts. Go to step 2.
2. Select one of the following radio buttons to specify an alert level:
a) All storage arrays – To send an alert email about events on all storage arrays. Click OK.
The Configure Alerts dialog box appears. Go to step 4.
b) An individual storage array – To send an alert email about events that occur on only a specified storage array.
Click OK.
The Select Storage Array dialog box appears. Go to step 3.
3. Select the storage array for which you want to receive email alerts and click OK.
The Configure Alerts dialog box appears.
NOTE: If you do not know which storage array to select, click Blink to turn on the indicator lights of the
storage array.
4. Fill in the information for the selected tab and click OK.
The dialog box closes, and the Enterprise Management Window appears. An email alert is sent to the specified
email address when an error occurs on the storage arrays or hosts that you selected.
48