Dell PowerVault MD3260i - Manual (Page 321)

Parameter Description
NOTE: To determine the type of physical disk in a
specific location, use the physicalDisk
parameter, and enter the enclosure and slot IDs for
the physical disk.
Show Physical Disk Channel Statistics
Description
This command shows cumulative physical disk channel data transfer and error information. If the RAID controller
module has automatically degraded a channel, this command also shows interval statistics. When using this command,
you can display information about one specific physical disk channel, several physical disk channels, or all physical disk
channels.
Syntax
show (physicalDiskChannel [(1 | 2)] |
physicalDiskChannels [1 2] | allPhysicalDiskChannels) stats
Parameters
Parameter Description
physicalDiskChannel Identifier number of the physical disk port for which to
display information. Valid physical disk port values are 1
or 2. You must put brackets ([ ]) around the physical disk
channel values.
physicalDiskChannels Identifier number of the physical disk ports for which to
display information. Valid physical disk port values are 1
or 2. You must put brackets ([ ]) around the physical disk
channel values.
allPhysicalDiskChannels The identifier that selects all of the physical disk ports.
Show Physical Disk Download Progress
Description
This command returns the status of firmware downloads for the physical disks targeted by the download
physicalDisk firmware or download storageArray physicalDiskFirmware commands.
Syntax
show allPhysicalDisks downloadProgress
321