Dell PowerVault MD3260i - Manual (Page 385)

13
CLI Command Updates
This chapter reflects new and updated commands that are available for use with Dell's PowerVault Modular Disk Series
of storage arrays.
NOTE: Not all commands are necessarily valid with all storage arrays - some commands are specific to certain
platforms.
CAUTION: Script commands are capable of changing the configuration and may cause loss of data if not used
correctly. Command operations are performed as soon as you run the commands. Before using the script
commands, ensure that you have backed up all data, and have saved the current configuration so that you can
reinstall it if the changes do not work.
New Commands
The following commands have been added to this guide to reflect the additional functionality available in the PowerVault
MD32 and MD36 series of arrays.
• Add Member To Consistency Group
• Add Physical Disks to SSD Cache
• Add Virtual Disk to Remote Replication Group
• Blink SSD Cache
• Cancel Remote Replication Group Role Reversal
• Change SSD Cache Application Type
• Check Remote Replication Group Consistency
• Check Repository Consistency
• Check Storage Array Connectivity
• Clear Remote Replication Fault
• Convert A Snapshot (Legacy) Virtual Disk To A Snapshot Group
• Create Consistency Group
• Create Consistency Group Snapshot Image
• Create Consistency Group Snapshot Virtual Disk
• Create Consistency Group Snapshot Virtual Disk Mapping
• Create Read-Only Snapshot Virtual Disk
• Create Remote Replication Group
• Create Snapshot (Legacy) Virtual Disk
• Create Snapshot Group
• Create Snapshot Image
• Create SSD Cache
• Deactivate Remote Replication
• Delete Consistency Group
• Delete Consistency Group Snapshot Image
• Delete Consistency Group Snapshot Virtual Disk
385