Removing the sas controller daughter card, Ee. see figure 3-27, See figure 3-27 – Dell PowerVault DP600 User Manual
Page 127: The slots. see figure 3-27, Figure 3-27
Advertising
Installing System Components
127
Figure 3-27.
Replacing a SAS RAID Controller Daughter Card Battery
Removing the SAS Controller Daughter Card
The following procedure applies to either a SAS controller or a SAS RAID
controller daughter card. A SAS RAID controller daughter card is illustrated in
Figure 3-28.
1 If applicable, disconnect the RAID battery cable from the controller card
by releasing the tab on the cable connector on the daughter card and
pulling the battery cable free.
1 SAS RAID controller
daughter card
2 RAID battery cable
3
connector release tab
4 routing hole for RAID
battery cable
5 expansion-bay
bracket
6
battery bay
7 RAID battery
6
7
4
3
1
5
2
book.book Page 127 Monday, September 14, 2009 1:53 PM
Advertising