Dell PowerVault DP600 - Manual (Page 76)

76
Installing System Components
Installing a SATA Hard Drive Into a SATA Drive Carrier
NOTE:
SATA hard drives that connect directly to the SAS backplane must be
installed in SATA drive carriers (labeled "SATA"). Only SATA hard drives with
interposer cards can be installed in SATAu drive carriers.
1 Insert the SATA hard drive into the hard-drive carrier with the connector
end of the drive at the rear. See Figure 3-8.
2 Align the screw holes on the hard drive with the holes on the hard-drive
carrier. See Figure 3-8.
3 Attach the four screws to secure the hard drive to the hard-drive carrier.
See Figure 3-8.
Figure 3-8. Installing a SATA Hard Drive Into a SATA Drive Carrier
1 screws (4) 2 SATA drive carrier 3 SATA hard drive
1
3
2
book.book Page 76 Monday, September 14, 2009 1:53 PM