Dell PowerVault DP600 - Manual (Page 66)

66
Installing System Components
Removing the Peripheral Bay Panel (Tower Only)
NOTE:
The peripheral bay panel can be removed only from inside the bezel.
1 With the bezel removed from the system, place the bezel face-down on
a flat working surface.
2 Locate the release tabs inside the bezel at the bottom of the peripheral bay
panel and press in on the tabs and push forward to slide the panel outward
from the bezel. See Figure 3-3.
3 Remove the panel from the front side of the bezel.
4 Reinstall the bezel on the system. See "Installing the Bezel" on page 67.
Figure 3-3. Installing and Removing the Peripheral Bay Panel (Tower)
1 tower bezel with
peripheral bay panel
2 peripheral bay panel 3 tab (2)
4 bezel (inside view) 5 tab slot (2)
2
3
1
5
4
book.book Page 66 Monday, September 14, 2009 1:53 PM