Dell PowerVault DP600 - Manual (Page 50)

50
Using the System Setup Program
CPU Information Displays information related to microprocessors (speed, cache
size, and so on). Enable or disable Hyper-Threading technology
by changing the setting of the Logical Processor option. See
Table 2-3.
SATA Port X Displays type and capacity of SATA drive attached to Port X on
the system board.
Boot Sequence Determines the order in which the system searches for boot
devices during system startup. Available options can include the
diskette drive, CD drive, hard drives, and network.
NOTE:
System boot is not supported from an external device
attached to a SAS or SCSI adapter. See support.dell.com for the
latest support information about booting from external devices.
USB Flash Drive
Type
(
Auto default)
Determines the emulation type for a USB flash drive. Hard disk
allows the USB flash drive to act as a hard drive. Floppy allows
the USB flash drive to act as a removal diskette drive. Auto
automatically chooses an emulation type.
Integrated Devices See "Integrated Devices Screen" on page 52.
PCI IRQ
Assignment Displays a screen to change the IRQ assigned to each of the
integrated devices on the PCI bus, and any installed expansion
cards that require an IRQ.
Serial
Communication Displays a screen to configure serial communication, external
serial connector, fail-safe baud rate, remote terminal type, and
redirection after boot.
Embedded Server
Management Displays a screen to configure the front-panel LCD options and
to set a user-defined LCD string.
System Security Displays a screen to configure the system password and setup
password features. See "Using the System Password" on page 56
and "Using the Setup Password" on page 59 for more
information.
Keyboard
NumLock
(
On default)
Determines whether your system starts up with the NumLock
mode activated on 101- or 102-key keyboards (does not apply to
84-key keyboards).
Table 2-2. System Setup Program Options (continued)
Option Description
book.book Page 50 Monday, September 14, 2009 1:53 PM