Dell PowerVault DP600 - Manual (Page 27)

About Your System
27
E1620 PS # Input
Range
Power source for specified
power supply is unavailable,
or out of acceptable range Check the AC power
source for the specified
power supply. If problem
persists, see
"Troubleshooting Power
Supplies" on page 155.
E1624 PS
Redundancy
The power supply subsystem
is no longer redundant. If the
last supply fails, the system
will go down. See "Troubleshooting
Power Supplies" on
page 155.
E1710 I/O Channel
Chk
The system BIOS has
reported an I/O channel
check error. See "Getting Help" on
page 185.
E1711 PCI PERR B##
D## F##
PCI PERR
Slot #
The system BIOS has
reported a PCI parity error
on a component that resides
in PCI configuration space at
bus ##, device ##,
function ##.
The system BIOS has
reported a PCI parity error
on a component that resides
in PCI slot #.
Remove and reseat the
PCI expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 168.
If the problem persists,
the system board is faulty.
See "Getting Help" on
page 185.
E1712 PCI SERR B##
D## F##
PCI SERR
Slot #
The system BIOS has
reported a PCI system error
on a component that resides
in PCI configuration space at
buss ##, device ##,
function ##.
The system BIOS has
reported a PCI system error
on a component that resides
in slot #.
Remove and reseat the
PCI expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 168.
If the problem persists,
the system board is faulty.
See "Getting Help" on
page 185.
Table 1-6. LCD Status Messages (continued)
Code Text Causes Corrective Actions
book.book Page 27 Monday, September 14, 2009 1:53 PM