Dell PowerVault DP600 - Manual (Page 64)

64
Installing System Components
Opening and Closing the System
The system is enclosed by an optional bezel and cover. To upgrade or
troubleshoot the system, remove the bezel and cover to access the drives and
internal system components.
Removing the Bezel
Removing the Rack Bezel
1 Unlock the keylock at the left end of the bezel. See Figure 3-1.
2 While grasping the bezel, press the release latch on the left edge of the
bezel, adjacent to the keylock.
3 Rotate the left end of the bezel away from the front panel.
4 Unhook the right end of the bezel and pull the bezel away from the
system. See Figure 3-1.
Figure 3-1. Installing and Removing the Optional Bezel (Rack)
1 key lock 2 bezel (rack) 3 bezel slot (2)
1
2
3
book.book Page 64 Monday, September 14, 2009 1:53 PM