Closing the system – Dell PowerVault DP600 User Manual
Page 68
Advertising
68
Installing System Components
6 Grasp the cover on both sides and carefully lift the cover away from the
system.
Closing the System
1 Lift up on the cover latch.
2 Place the cover on top of the system and offset the cover slightly back so that
it clears the chassis J hooks and lays flat on the system chassis. See Figure 3-4.
3 Push the latch down to lever the cover into the closed position.
4 Turn the latch release lock clockwise to the locked position. See Figure 3-4.
5 Replace the Kensington cable lock on the back of the chassis. See
Figure 1-4 for the location of the lock slot on the back of the chassis.
book.book Page 68 Monday, September 14, 2009 1:53 PM
Advertising