Doremi Asset Manager - Manual (Page 25)

3.2.5 Device Settings Window
The “Device Settings” window allows you to view and make changes to the parameters and
configuration settings of the device. To get to the “Device Settings” window, click on the “Info”
Tab, which can be accessed by from the “Device Tab” on the main GUI (see Figure 23).
Please see the following instructions on how to access the “Device Settings” window from each
device:
How to use the “Device Settings” option when connected to a Nugget:
When connected to a Nugget unit with the appropriate Nugget firmware version, clicking the
“Device settings” button will prompt you to the “Device Settings” window where you will see two
tabs: General and Audio/Video (see Figure 26).
• The “General” tab allows access to the general parameters of the connected device.
• The “Audio/Video”tab allows access to audio/video specific parameters of the selected
device.
_____________________________________________________________________________________
AMR.OM.000163.DRM Page 25 Version 2.2
Doremi Labs Inc.
Instructions:
• Nugget Specific :
To have access to this “Device settings” window when connected to a
Nugget Player, the Nugget should have firmware version 1.4.27-67 or
higher – check the Nugget’s firmware version using the “Info” tab as
shown in Figure 23.
If the Nugget does not have the proper firmware, clicking on the “Device
settings” button will bring an alert window asking you to upgrade to
version 1.4.27-67 or higher.
*To upgrade the Nugget firmware using Doremi AM, please refer to
Section 5.1 .