Doremi Asset Manager - Manual (Page 38)

Figure 37: “3D – Files Assignment” Window
• After pressing Ok on the “3D Assignment Window” the “3D Merge settings” window will
appear (see Figure 38).
Figure 38: "3D Merge Settings” Window
How to use the 3D merge settings:
• To navigate within both the selected 2D clips, with each one corresponding to the right
or left “eye” (see Figure 38), use the “--” and “++” buttons or the “position cursor” button.
• To manually navigate through the clips, enter the desired timecode in the “timecode
value” box (see Figure 38) and then click “Locate,” this will prompt the clip directly to the
entered timecode position.
• When you select the timecode values, the “Set In” and “Set Out” boxes will automatically
be computed to match. To make those values the permanent IN and OUT points for your
new 3D clip, click on the “Set In” and “Set Out” buttons (See Figure 38).
_____________________________________________________________________________________
AMR.OM.000163.DRM Page 38 Version 2.2
Doremi Labs Inc.
“Set-Out”
“Set-In”
Right eye clip
snapshot
“Locate”
button
“Set sync
Point” button
Left eye clip
snapshot
“--” and “++”
buttons
“Name” field
“Use
Audio
track from
Clip”
buttons
“Timecode
Value”