Doremi Asset Manager - Manual (Page 75)

Figure 77: VUPloader Utility
• From the File menu of the VUPloader utility select Open.
• Browse for the appropriate firmware .bin file and press Open.
Note: Make sure to select the appropriate firmware as Doremi AM will install with the current
firmware for all V1 types.
The V1 Frimware naming convention is as follows:
• C_HD_4.xx.bin for V1-HD units.
• HD200_4.xx.bin for V1-UHD units.
• HD_LE_4.xx.bin for V1-UHD/LE units.
• After the appropriate firmware is loaded, press the connect button.
• In the pop up window type in your V1's IP address and press Ok.
Figure 78: VUPloader with Firmware Loaded and Connected to V1 Unit
• Press the “Upgrade” button to start the firmware upgrade process.
• During the upgrade the unit will do a soft reboot.
• Once the firmware upgrade is finished you can close the VUPloader utility.
• Verify in OPTION+MENU (00) that he unit shows the new Firmware version.
_____________________________________________________________________________________
AMR.OM.000163.DRM Page 75 Version 2.2
Doremi Labs Inc.