Xtramus NuWIN-RM V1.4 - Manual (Page 100)

100
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
9.1. Link Layer Type
9.1.1. Ethernet II
The Ethernet II setting page allows you to set MAC Addresses.
MAC Address
Destination
Address
You can set the Destination MAC Address here in this field.
Source
Address
You can set the Source MAC Address here in this field.
Broadcast
Press the Broadcast button to set the Destination MAC Address to broadcast MAC
Address (FF-FF-FF-FF-FF-FF).
9.1.2. IPX
IPX stands for Internetwork Packet Exchange, an OSI-model Network layer protocol in the IPX/SPX
protocol stack. Also, you can set LLC (Logical Link Control) headers on packets here as well.
MAC Address
Destination
Address
You can set the Destination MAC Address here in this field.
Source
Address
You can set the Source MAC Address here in this field.
LLC Parameters
Length The length of LLC headers.
Control Field
The Control Field allows you to input codes that represent command, response, and
sequence number information.
DSAP
DSAP stands for Destination Service Access Point. Service Access Point (SAP) is
an identifying label for network endpoints.
SSAP
SSAP stands for Source Service Access Point. Service Access Point (SAP) is an
identifying label for network endpoints