Xtramus NuWIN-RM V1.4 - Manual (Page 60)

60
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
D. Mesh Network
In Mesh network mode, packets will be sent from port to port in a loop while the last port will be
connected to the first port, as shown in the picture above.
There are two menu tabs available here: Ports Arrangement and Stream Setting:
 Ports Arrangement: This tab allows you to assign ports. To know more about assigning ports,
please see the
“Mesh –Ports Arrangement” section.
 Stream Setting: This tab allows you to edit packet frames. To know more about edit packet
frames, please refer to E. Editing Frame.