Compuprint 4247-Z03 - Manual (Page 111)

Serial Interface
Interface Type
This parameter allows you to select the Serial Interface attachment type. You can
set Interface Type to:
v RS-232C (Default)
To change or check the Interface Type:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Serial Interface
5. Press ENTER to display
Serial Interface
Interface Type
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Interface Type is displayed.
8. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Input Buffer Size
You can set the Input Buffer Size to:
v
256
v 2K
v 12K
v 32K (Default)
v 64K
v 128K
To change or check the Input Buffer Size:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Chapter 7. ASCII Configuration 95