Moving the printer to the final location, Lifting the printer – Compuprint 4247-Z03 User Manual
Page 22
Advertising
![background image](/files/778645/content/doc022.png)
Moving the printer to the final location
Do not plug in the printer power cord until instructed to do so.
1.
Remove the plastic covering.
Keep the packing material in a safe place. It should be used if you need to
repack the printer for shipment.
CAUTION:
<2-82> The 4247 Model Z03 printer weighs 33 kg (73 lb). Two
persons are required to lift it.
!
CAUTION:
<2-83> The lifting handles are located forward of the center of
gravity. For good printer balance, each person should place
one hand in a gray lifting handle and the other hand under
the rear of the printer.
2.
Using two persons, safely move the printer to the selected location (see
“Choosing a suitable location” on page 2).
Figure 4. Lifting the printer
6
User's Guide
Advertising
This manual is related to the following products: