Compuprint 4247-Z03 - Manual (Page 35)

4. Put the left sprocket holes of the form over the left tractor pins. Close the left
tractor sprocket cover.
5. Move the right tractor until the right sprocket holes of the form fit on the
right tractor pins. Ensure that the forms go under the forms jam sensor and
that the forms are straight.
6. Close the right tractor sprocket cover.
e61a2034
Figure 25. Placing the form on the tractor pins
e61a2035
Figure 26. Placing the forms on the right tractor pins
Chapter 1. Getting Started 19