Compuprint 4247-Z03 - Manual (Page 165)

Chapter 18. Supplies, optional features, and maintenance
Continuous forms specifications . . . . . . . 149
Forms stacking recommendations . . . . . . 150
Forms stack input and output locations . . . . 150
Supplies . . . . . . . . . . . . . . . 151
Optional features . . . . . . . . . . . . 151
Maintenance. . . . . . . . . . . . . . 152
Removing the ribbon cartridge . . . . . . 152
Cleaning the Printer . . . . . . . . . . 152
Cleaning Inside the Printer . . . . . . . 153
Cleaning the Outside Covers . . . . . . 153
Continuous forms specifications
The 4247 Model Z03 operates with continuous forms. All forms should be
evaluated in the printer's functional environment for forms handling, print
registration, and print quality acceptability prior to use. The forms must meet the
following specifications:
Paper Criteria Characteristics
Continuous Forms
Front Push, Rear Push
Dimensions Width 76.2 to 431.8 mm
3 to 17 in.
Length 76.2 to 609.6 mm
3 to 24 in.
Single Part Weight 55 to 150 g/m 2
15 to 40 lb
Thickness 0.08 to 0.635 mm
0.003 to 0.025 in.
Multiple Part Maximum parts
(Original + Copies) 1 + 7 Chemical
1 + 5 Carbon Paper
Overall Thickness 0.08 to 0.635 mm
0.003 to 0.025 in.
Weight of top part 55 to 150 g/m 2
15 to 40 lb
Attached sheet
individual weight 45 to 75 g/m 2
12 to 20 lb
Carbon paper
individual weight 14 to 35 g/m 2
4 to 9 lb
Notes:
1.
Test forms less than 152.4 mm (6 in.) in length or width for satisfactory
stacking. These forms may require additional operator attention.
2. For optimum performance, restrict the printable area to be within 6.4 mm (0.25
in.) from all edges, holes, or folds on the forms.
149