Compuprint 4247-Z03 - Manual (Page 114)

4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Serial Interface
5. Press ENTER and the printer displays
Serial Interface
Parity
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Parity is displayed.
8. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Pacing Control
You can set the Pacing Protocol to:
v
DTR (Default)
v XON/XOF
To change or check the Pacing Protocol setting:
1.
Press MENU.
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER.
4. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Serial Interface
5. Press ENTER and the printer displays
Serial Interface
Pacing Protocol
6. Press ENTER to display the current value.
7. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Pacing Protocol is displayed.
8. Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9. Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
98 User's Guide