Compuprint 4247-Z03 - Manual (Page 44)

– An intervention required condition (if the error has been corrected)
– After pressing STOP
v After pressing ENTER or START to run a test in the Operator Print Tests menu
v After a successful partial reset to ready after pressing CANCEL PRINT to exit
the Operator Print Tests
The READY indicator is not lighted because of one of the following conditions:
v After pressing STOP
v After detection of an intervention required condition
v After detection of a printer error
v After pressing MENU to enter the Configuration Menu when no print job is in
progress
v After pressing LOAD/EJECT to perform an eject to tear off position when Front
Push or Rear Push is selected.
PROCESSING
If lighted, the printer is printing or processing data. If blinking, the printer buffer
contains data that cannot be printed immediately. If not lighted, there is no data to
process and no data in the print buffer.
ATTENTION
If blinking, the printer requires operator intervention (for example, to add forms or
to clear a forms jam). The type of intervention needed appears on the display
panel. If not lighted, the printer does not require immediate attention.
Display panel
The display panel is a 2-line by 24-character liquid crystal display (LCD) that
displays printer status messages, the print test menu, and the configuration menu
categories, parameters, and values. Use this display panel and the printer function
keys to scroll through and select Configuration Menu items and Operator Print
Tests. You can set this display so the messages appear in one of the following
languages:
v
000 English (default)
v 001 Deutsche
v 002 Français
v 003 Italiano
v 004 Español
v 005 Nederlands
v 006 Dansk
v 007 Português
v 008 Norsk
v 009 Svenska
v 010 Suomi
v 011 Polski
Audible alarm
If you do not disable the audible alarm, it beeps if any of the following conditions
occur:
v Immediate intervention is required
v A printer error condition exists
28 User's Guide