Data bits – Compuprint 4247-Z03 User Manual
Page 112
ASCII Configuration
Serial Interface
5.
Press ENTER and the printer displays
Serial Interface
Input Buffer Size
6.
Press ENTER to display the current value.
7.
Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Input Buffer Size is displayed.
8.
Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9.
Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
Data Bits
You can set the Data Bits to either of the following values:
v
7
v
8
(Default)
To change or check the Data Bits:
1.
Press MENU.
2.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3.
Press ENTER.
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Serial Interface
5.
Press ENTER and the printer displays
Serial Interface
Data Bits
6.
Press ENTER to display the current value.
7.
Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Data Bits is displayed.
8.
Press ENTER.
An asterisk (*) will be displayed in front of the selected value.
9.
Press START or RETURN to exit the Menu. See “Exiting the configuration
menu” on page 39.
96
User's Guide