Compuprint 4247-Z03 - Manual (Page 57)

Table 1. Configuration storage category (continued)
Parameters Values Default
Recall Custom Set Custom Set A-H N/A
Power-On Custom Set Last Used Custom Set A-H Last Used
Power-On Paper Source Front
Rear
Last Used Front
Recall Factory Defaults Yes N/A
Note: Use Recall Factory Defaults to set all the parameters to the manufacturing default values. See “Recall factory
defaults” on page 54.
Attachment
Table 2 lists the parameters available for the Attachment Category. Refer to
Chapter 5, “Attachment Options,” on page 57 for detailed information on setting
these parameters
Table 2. Attachment Category
Parameters Values Default
Attachment Hot Port Switch, Parallel,
Serial, USB, LAN ASCII,
LAN IPDS Hot Port Switch
IPDS Configuration
Table 3 lists the parameters available for the IPDS Configuration Category.
Parameters that can be overridden by the computer are noted with a dagger (†).
Refer to Chapter 6, “IPDS Configuration,” on page 59 for detailed information on
setting these parameters
Table 3. IPDS Configuration Category
Parameters Values Default
† Characters Per Inch 10
12
15
16.7 10
† Lines Per Inch 6
8 6
† Maximum Print Position 001 to 227 132
† Maximum Page Length 001 to 880 066
† Print Quality Fast Draft Quality
DP Quality
DP Text Quality
Near Letter Quality Fast Draft Quality
Host Fast Draft Enabled
Disabled Enabled
† Print Language 037 to 1149
Supported Print Languages
See Table 13 on page 64. 500 International 5
Host Fast Draft Disabled
Enabled Enabled
Chapter 3. Checking and changing configuration parameter values 41